Digital Satellite Receivers > DTVS-1B
DTVS-1B Wake-Up Timer
(1/1)
rubybay:
Hi. In trying to set the wake-up timer to commence at say 20:30, at times it won't accept a '2' as the first digit, so the timer either has to set to commence at 19:59 or (if it's already after 20:00) started manually. Is this a fault with the software on the unit and if so, is it possible to fix ...? Thx.
admin:
Hi,
There is no fault. It will not accept a '2' if time is more that 23:59. Here is an example:
1) Current time is 16:50
2) When you add a wake up time, the default time will appear as the current time which is 16:50
3) If you press a '2' to change the time, the receiver will read the time as 26:50 which is not valid. Hence '2' is not accepted.
A solution to this is to clear the time by pressing the zero button and then entering your time.
AH
Navigation
[0] Message Index
Go to full version