Author Topic: DTVS-SMART1 Firmware, Channels and Application recovery (Updated 31 May 2020)  (Read 12374 times)

admin

  • DTV Solutions
  • Administrator
  • Sr. Member
  • ****
  • Posts: 341
    • DTV Solutions
Please use the following to recover the software on the DTVS-Smart1.

1. Download the latest software version 1.5.7 via this link: https://drive.google.com/file/d/1XVeQpJgQZ9pKU3SVoglsK7VR3C_Gmier/view?usp=sharing
2. Download the DefaultApp application via this link: https://www.dtvs.co.nz/g4defaultapps/apps/G4DefaultApps.apk
3. Extract the file "NTOBE-S_UPGRADE.BIN" to the root directory of a USB memory key
4. Save the G4DefaultApps.apk file to the USB memory key
5. Shut down the DTVS-SMART1 and then insert the USB key into the USB1 slot (at the back). Please ensure no other USB devices are attached.
6. Start the DTVS-SMART1 and then immediately press the RED button until the "Recovery Menu" appears.
7. Select Option 3 and then Option 3 again and the 1 (yes) to clear all partitions
8. The receiver will restart and begin loading the software and will restart.
9. The DTVS-Smart1 will restart to blank TV screen with no channels.
10. Press the GREEN button to show the applications available.
11. Select "APK Installer" and then navigate to "G4DefaultApps.apk" and follow the prompts to install over the existing DefaultApps application.
12. Exit "APK Installer" and then run the "DefaultApps" application.
13. You should see a list of "Current Applications"
14. Install all items in Current Applications after "DefaultApps" by selecting "Download".
15. Once done exit the DefaultApps application and do the following steps...

a) RESET THE DTVS-SMART1

1. Press the MENU button and the select SETUP
2. Enter the PIN code. Default PIN code is 0000
3. Select "System" and the "Factory Reset" and press OK. Select OK to confirm you want to continue.
4. The DTVS-SMART1 will be reset and the device will boot to the "First Time Installation" screen
5. Follow the prompts for setup.
6. If the signal is not found. Press the BLUE button to skip the channel installation and follow the manual channel installation process.

b) MANUAL CHANNEL INSTALLATION (Optional if you are only using the DTVS-SMART1 as an IP box)

1. Download the channel file via this link:  https://www.dtvs.co.nz/download/dtvssmart1/channels/DTVS-SMART1-LNB-10750-channel.zip
2. Unzip the file to your USB memory key.
3. Insert the USB memory key in the receiver.
4. Go to Setup and then select Upgrade.
5. Select "Upgrade channel data via USB".
6. Navigate to your file and select it.
7. Once the update is complete, the receiver will restart and your channels will be loaded.
8. If you see a picture, then your settings are correct. You may have to put the volume up to on the DTVS-SMART1 remote hear sound. You may proceed to Section C.
9. If you see a "no signal" then you LNB Frequency setting may be incorrect. Try the following to get a signal:
9a. Press the MENU button and the select SETUP
9b. Enter the PIN code. Default PIN code is 0000
9c. Select "Channel Search"
9b. Highlight Optus D1 Satellite on the left
9c. Press the GREEN button to Edit the settings
9d. Move down to "TP. Info" and press the OK bitton.
9e. Select "12456MHz H 22500Ks/s S" or "12483MHz H 22500Ks/s S"
9f. Move to "LNB Frequency" and select "11300" and see if the "S" and "Q" bars come up. if yes, then you have a signal and you can press the back button to exit the menu.
9g. If you do not get a signal. Select "User" for "LNB Frequency" and then enter 10740 and press OK.
9h. If you still get no signal, contact DTV Solutions for assistance.

c) LOADING THIRD PARTY APPLICATIONS

Your third party applications can be loaded via the "APK Installer". Search the APKMirror site for a working APK file of your application. When downloading an application for the DTVS-SMART1, please ensure that you download a version of that application developed to work on Android Version 4.0+.


For further assistance, please contact DTV Solutions Help Line
« Last Edit: May 31, 2020, 10:55:52 am by admin »