Author Topic: Retuning Channels - TV3 and some channels missing  (Read 11998 times)

admin

  • DTV Solutions
  • Administrator
  • Sr. Member
  • ****
  • Posts: 341
    • DTV Solutions
Retuning Channels - TV3 and some channels missing
« on: June 27, 2014, 12:09:09 pm »
After resetting and re-tuning, your receiver may not collect TV3 and some other channels. You can upgrade your receiver to the latest software which will collect all the channels or carry out the following manual tuning process to tune the channels:

1. Carry out a factory reset ( Menu/System Installation/Factory Default)
2. Start the auto tune (Select your location and press OK)
3. Press the OK button once the scanning reached frequency 12421 and save the results.
4. Press Menu and go to System Installation/installation/satellite scan/TP List
5. Select the TP with frequency 12456 (Freeview2) and press Scan (red)
6. Choose Network search ON, Search Type FTA and press OK.
7. The scan will go through the following transponders: 12456, 12483, 12519.
8. After 12519 is scanned press the OK button and save the results.
9. All channels will be tuned in.


« Last Edit: May 26, 2016, 04:24:08 pm by admin »